Assemblying Rotator for Stator of Wind Energy Power Generator 1.5 Megawatt Equipment Use Germany Technical
Machine Overview
Wuxi Luole Welding Plant design and build conventional rotators from 1 Ton Pipe Rotators to 1200 Ton. This machine are special supplied for wind power generator stator . If you are interested in this type machine , please email to my factory no hesitate.
Supply Ranges
1. Consist : One powered roller , One idler roller , Electric control system
2. Adjust way : Adjust the pipe diameter 1500 - 8000 mm
3. Voltage : 110V - 600 V 50 / 60 Hz 1P / 3P all available
4. Control Way : Remote hand control box / Wireless hand control box
5. Roller Material : Rubber / Steel / PU ( Polyurethane roller for Nonferrous Metals )
6. Original : Our factory / Wuxi China
Attention More If you require
1. Movable rotators can auto move on the rails for the third single pipe butt welding.
2. It will be controled by Hand Remote Control Box or Wireless Control Box.
3. During two single pipes butting , the position could not butt well sometimes , our rotators can adjust the
butt position up or down / left or right to realize the perfect butt position.
4. Two self aliging rollers in the two end, and two hydrulic adjust rollers in the middle to adjust the butt positon.
Specification
Applications
1. For pipe support and turning for auto seam welding
2. To make wind tower
3. For auto circle seam welding
4. Controlled by foot pedal / hand control box
More Questions Customers May Concerned
Q : What about the transportion?
A : 1. Fully packaged in wooden case to anti damage during the transportational process .
2. Usually we take seaway ,cause its more convenient and cheaper for big machine.
3. Door to door delivery service is also available.
Q : What is your warranty and after sale service ?
A : 1. All our equipments with One Year Warranty time , fully test at our work shop before delivery.
2. If you have any questions on the installation , you will get our engineers respond within 24 hours.
Details Control system and Brand
1. Inverter is from Taida / Yaskawa Brand
2. Motor is from CE Invertek Brand
3. Reducer is from Cable. Made in China.
4. Electric system is from Schneider
Our suggestion
1. Normally under 60 T model we use the Rubber material rollers , upper we use Steel material rollers.
2. If your work piece material is Nonferrous Metals , we suggest PU rollers.
3. Self-aligning welding rotator / Bolt adjsutment / Lead Screw adjustment / Fit up rotators all available.
DO NOT HESITATE ! JUST SEND US YOUR INQUIRY NOW.
Product Tags:
|
|
Special Assemblying Rotator for Stator of Wind Energy Power Generator 1.5 Megawatt Equipment Use Germany Technical Images
|
